The Avdel nG3 tool allows the placement of a large range of breakstem rivets, lockbolts and sealing plug sizes. With an intergrated counter this tool can be used for a variety of applications and enable you to keep track of your progress.

Fast Facts:

  • Weight (without nose equip.) 2.25 kg (4.95 lbs)
  • Weight (min. with equip.) 2.30 kg (5.1 lbs)
  • Pull force @ 5.5 bar 12.9 kN (2900 lbf)
  • Stroke (min.) 26 mm (1.02 in)
  • Cycle time (approx.) 1.2 sec
  • Air supply pressure 5- 7 bar (80-100 psi)
  • Free air volume @ 5.5 bar 4.3 litres
  • Noise level <75>
  • Vibration <2.5m ²="" (8.2f="">
  •  

     

    Placing Capability:

    All breakstem rivets produced by Avdel up to 6.4mm (1/4"), except Avibulb® XT 6.4 mm (1/4"), Avinox® XT 6.4 mm (1/4") and Hemlok® structural fasteners. Can also place Avseal II sealing plugs up to 9 mm and Avtainer® lockbolts 10.0mm (3/8").

    Need Help Finding the Right Solution?

    Let our experts provide recommendations for your project or application.

    Contact Us

    The availability of the products described on this site, and the product descriptions, may vary from country to country. Consult your STANLEY Engineered Fastening Account Executive or your local distributor for specific product information.