These stainless steel standoffs ensure permanent mounting in metal sheets as thin as 0.062 in. (1.6mm).

The concealed head feature in these Spiralock fasteners allows the side opposite installation to remain smooth and unmarred. The fastener head is locked securely in a blind milled hole and is able to handle substantial loads.

Our Self-Clinching Concealed-Head Standoffs are made to order and are available in lengths ranging from 0.187 through 1.00 in increments of 1/16th of an inch.

Fast Facts:

  • Stainless steel construction
  • Made for mounting in thin metal sheet
  • Features a concealed head, allowing opposite side installation to remain unmarred
  • Features the Spiralock proprietary wedge ramp female thread
  • Made-to-order
Thread Size EDP # Head Shape Min. Sheet Thicknesss Blind Mount. Hole Dia.* Min. Depth of Blind Hole Min. Depth of Full Thread A
Max.
B
Max.
C
Max.
H ±0.010 Min. Dist. Hole C/L To Edge
4-40 92200 92201 Round Sharp 0.062 0.093 0.213 0.213 0.043 0.075 0.188 0.188 0.040 0.075 0.165 0.165 0.212 0.212 0.250 0.250 0.188 0.188
6-32 92205 92206 Round Sharp 0.062 0.093 0.290 0.290 0.043 0.075 0.250 0.250 0.040 0.075 0.213 0.213 0.289 0.289 0.312 0.312 0.219 0.219
8-32 92210 92211 Round Sharp 0.062 0.093 0.312 0.312 0.043 0.075 0.250 0.250 0.040 0.075 0.245 0.245 0.311 0.311 0.344 0.344 0.250 0.250
10-32 92215 92216 Round Sharp 0.062 0.093 0.344 0.344 0.043 0.075 0.375 0.375 0.040 0.075 0.290 0.290 0.343 0.343 0.375 0.375 0.281 0.281
¼-20 92220 92221 Round Sharp 0.062 0.093 0.390 0.390 0.043 0.075 0.375 0.375 0.040 0.075 0.354 0.354 0.389 0.389 0.438 0.438 0.375 0.375
M3 x 0.5 92225 92226 Round Sharp 1.60 2.40 5.40 5.40 1.09 1.91 5.00 5.00 1.02 1.91 4.20 4.20 5.38 5.38 6.35 6.35 4.80 4.80
M4 x 0.7 92230 92231 Round Sharp 1.60 2.40 7.95 7.95 1.09 1.91 6.50 6.50 1.02 1.91 6.23 6.23 7.90 7.90 8.74 8.74 6.40 6.40
M5 x 0.8 92235 92236 Round Sharp 1.60 2.40 8.75 8.75 1.09 1.91 9.60 9.60 1.02 1.91 7.37 7.37 8.71 8.71 9.53 9.53 7.20 7.20
M6 x 1.0 92240 92241 Round Sharp 2.40 2.40 9.90 9.90 1.91 1.91 9.60 9.60 1.91 1.91 9.00 9.00 9.88 9.88 11.11 11.11 9.50 9.50

 

Important: These fasteners are made to order and are available in lengths ranging from 0.187 through 1.00 in increments of 1/16th in. Please specify your required length when ordering.

Notes: Dimensions for metric sizes are in millimeters.

*Tolerances:

Fractional +.003 - .000 Metric +0.08 - 0.00

Need Help Finding the Right Solution?

Let our experts provide recommendations for your project or application.

Contact Us

The availability of the products described on this site, and the product descriptions, may vary from country to country. Consult your STANLEY Engineered Fastening Account Executive or your local distributor for specific product information.