These standoffs install with a squeeze in punched or drilled round holes. Best used in thin sheet or metal, after install they become permanently attached with their heads flush with one surface of the mounting sheet.
Standoffs are made to order and are available in steel, stainless steel, or aluminum and in lengths (L) ranging from 0.125” through 1.062” (3-25mm) in increments of 1/32nds of an inch (2mm).
Spiralock® fasteners effectively address vibration loosening issues in threaded joints, improving fatigue life and eliminating the need for other locking devices.
- Install with a squeeze
- Features the Spiralock® proprietary wedge ramp female thread
- Available in steel, stainless steel, or aluminum
- Made to order
|Thread Size||EDP #||Minimum Sheet Thickness||Hole Size in Sheet*||B
|Min. Dist. Hole C/L to Edge|
|4-40||92800 92801||0.040 0.040||0.166 0.213||0.125 0.125||0.165 0.212||3/16 1/4||0.23 0.27|
|6-32||92805 92806||0.040 0.050||0.213 0.281||0.156 0.156||0.212 0.280||1/4 5/16||0.27 0.31|
|M3 x 0.5||92820 92821||1.00 1.00||4.20 5.40||3.20 3.20||4.19 5.38||4.80 6.40||6.00 6.80|
|M4 x 0.7||92825||1.30||7.20||4.80||7.11||7.90||8.00|
|M5 x 0.8||92830||1.30||7.20||5.20||7.11||7.90||8.00|
Important: Standoffs are made to order and are available in steel, stainless steel, or aluminum and in lengths (L) ranging from 0.125” through 1.062” (3-25mm) in increments of 1/32nds of an inch (2mm). Please specify your required material and length when ordering.
Notes: Dimensions for metric sizes are in millimeters.
|*Hole||- Fractional + .003 - .000||Metric + 0.08 - 0.00|
|C||- Fractional + .000 - .005||Metric + 0.00 - 0.13|