Spiralock® Self-Clinching Projection Weld Nuts
Spiralock® Self-Clinching Projection Weld Nuts provide load-bearing threads in sheets too thin to tap and are designed for faster assembly.
Their design, based on the experience of hundreds of users of weld nuts and speed production using standard equipment, overcomes many problems associated with other weld nuts – such as burnouts, complicated electrodes and pilots, tedious time-consuming indexing, and re-tapping to remove weld spatter.
These weld nuts also offer the added advantages of resisting corrosion and being essentially nonmagnetic.
Our weld nuts are made to order and available in low-carbon steel with a plain finish protected with light oil and a 300 Series stainless steel processed per ASTM A380 and/or tested per QQ-P-35C.
- Provide load-bearing threads in sheets too thin to tap.
- Corrosion resistant.
- Features the Spiralock® proprietary wedge ramp female thread.
- Offers improved integrity and reliability of threaded joints.
- Self- locking thread technology eliminates need for other locking devices.
- Made of either low-carbon steel or stainless steel.
- Made to order
|Thread Size||EDP #||A
|Minimum Sheet Thickness||Hole Size in Sheet*||C
|E||T||Min. Dist. Hole C/L to Edge|
|M3 x 0.5||93230||0.76||0.77||4.40||4.37||7.95||1.50||4.47|
|M4 x 0.7||93235||0.76||0.77||5.60||5.57||9.40||2.60||5.20|
|M5 x 0.8||93240||0.76||0.77||6.40||6.33||11.10||3.80||5.65|
|M6 x 1.0||93245||1.24||1.25||8.10||8.03||13.20||4.60||6.70|
Important: Weld nuts are made to order and available in: low-carbon steel with a plain finish protected with light oil and 300 Series stainless steel processed per ASTM A380 and/or tested per QQ-P-35C. Please specify weld nut material when ordering.
Notes: Dimensions for metric sizes are in millimeters.
|*Hole Size||- Fractional +.004 - 0.000||Metric +0.10|
|E||- Fractional +.000 - 0.010||Metric +0.00 - 0.13|
|T||- Fractional +.004 - 0.004||Metric +0.10 - 0.10|