Formerly Emhart Teknologies & Infastech

Self-Clinching Thru-Hole Threaded Standoffs

These standoffs install with a squeeze in punched or drilled round holes, and become permanently mounted in the thin sheet or metal—with their heads flush with one surface of the mounting sheet.

Self-Clinching Thru-hole Threaded Standoffs

Thread Size EDP # Minimum Sheet Thickness Hole Size in Sheet* B
Counterbore Dia.
C H
Nom.
Min. Dist. Hole C/L to Edge
4-40 92800 92801 0.040 0.040 0.166 0.213 0.125 0.125 0.165 0.212 3/16 1/4 0.23 0.27
6-32 92805 92806 0.040 0.050 0.213 0.281 0.156 0.156 0.212 0.280 1/4 5/16 0.27 0.31
8-32 92810 0.050 0.281 0.188 0.280 5/16 0.31
10-32 92815 0.050 0.281 0.203 0.280 5/16 0.31
M3 x 0.5 92820 92821 1.00 1.00 4.20 5.40 3.20 3.20 4.19 5.38 4.80 6.40 6.00 6.80
M4 x 0.7 92825 1.30 7.20 4.80 7.11 7.90 8.00
M5 x 0.8 92830 1.30 7.20 5.20 7.11 7.90 8.00

 

Important: Standoffs are made to order and are available in steel, stainless steel, or aluminum and in lengths (L) ranging from 0.125” through 1.062” (3-25mm) in increments of 1/32nds of an inch (2mm). Please specify your required material and length when ordering.

Notes: Dimensions for metric sizes are in millimeters.

Tolerances:

*Hole - Fractional + .003 - .000 Metric + 0.08 - 0.00
C - Fractional + .000 - .005 Metric + 0.00 - 0.13