Formerly Emhart Teknologies & Infastech

Self-Clinching Blind Hole Threaded Standoffs

These standoffs install with a squeeze in punched or drilled round holes, and become permanently mounted in the thin sheet or metal—with their heads flush with one surface of the mounting sheet.

Self-Clinching Blind Hole Threaded Standoffs

Thread Size EDP ## Minimum Sheet Thickness Hole Size in Sheet* C H
Nom.
Min. Dist. Hole C/L to Edge
4-40 92900 92901 0.040 0.040 0.166 0.213 0.165 0.212 3/16 1/4 0.23 0.27
6-32 92905 92906 0.040 0.050 0.213 0.281 0.212 0.280 1/4 5/16 0.27 0.31
8-32 92910 0.050 0.281 0.280 5/16 0.31
10-32 92915 0.050 0.281 0.280 5/16 0.31
M3 x 0.5 92920 92921 1.00 1.00 4.20 5.40 4.19 5.38 4.80 6.40 6.00 6.80
M4 x 0.7 92925 1.30 7.20 7.11 7.90 8.00
M5 x 0.8 92930 1.30 7.20 7.11 7.90 8.00

 

Important: Standoffs are made to order and are available in steel, stainless steel, or aluminum and in lengths (L) ranging from 0.125” through 1.062” (3-25mm) in increments of 1/32nds of an inch (2mm). Please specify your required material and length when ordering.

Notes: Dimensions for metric sizes are in millimeters.

Tolerances:

*Hole - Fractional +.003 - .00 Metric +0.08 - 0.00
C - Fractional +.000 - .005 Metric +0.00 - 0.13