Formerly Emhart Teknologies & Infastech

7536 Model

A lightweight tool for placing ø 1.6 mm (1/16") Avlug® Speed Fasteners.

Avdel's 7536 hydro-pneumatic hand tool is a lightweight tool with a separate intensifier. The 7536 rivet tool is designed to place the ø 1.6 mm (1/16") Avlug Speed Fastening® rivets. It is consistent and reliable to maximise productive time. With a long reach barrel this tool is ideal for hard to reach applications.


  • Lightweight tool with separate intensifier
  • Control box and air cursor for use of small diameter fastenings
  • Uses the same placing equipment and common parts of the 7530 tool
  • Long reach barrel
  • Can be suspended from a balancer (optional)


  • Reliable placing of small diameter fasteners
  • High placement speed
  • Reduced operator fatigue
  • Optimised ergonomic performance for improved productivity
  • Ease of maintenance
  • Productive time is maximised
  • Consistent actuation and hence joint formation
  • Can be used in many difficult access applications


  • Weight (pistol only) 1.2 kg (2.6lbs)
  • Pull force @ 5.5 bar 3.89 kN (875 lbf)
  • Stroke (min.) 25 mm (0.89 in)
  • Cycle time (approx.) 1 sec
  • Air supply pressure 5-7 bar (80-100 psi)
  • Free air volume @ 5.5 bar 2.6 litres
  • Noise level <70 dB(A)
  • Vibration <2.5m/s² (8.2f ft/s²)
  • Intensification ratio 32:1

Placing Capability

  • Avdel Avlug speed fastener 1.6mm

For detailed tool information and placing capability please refer to the  >>> Tool Manual or contact your local Avdel representative.